PLUMBING & PUMPING
Pipe Freezing Kit
-
Capacity: 15 -42 mm
-
5 - 45 minutes freezing time
Portable pipe freezing kit allows work to be carried out on plumbing systems without the need to drain down the system or locate the shut off valve. Fitted with 2 freeze heads designed to fit straight onto 42mm pipes with reducer fittings for 35mm 28mm 22mm & 15mm.
Specification
Video
Voltage: 110 V
Power: 550 W
Span : 3.9 metres
Freeze Time: 5 - 45 mins
Pipe Fittings: 15, 22, 28, 35 & 42 mm
Control: Active Capillary (microprocessor)
Refrigerant: R134a
Dimensions: 360 x 300 x 340 mm
Weight: 23 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£45
£25
£60
£90
Pipe Pressure Tester
-
Maximum pressure of 60 bar (840 psi)
-
R 1/2" BSPT connection
This compact manual pressure tester can test for leaks in pipework and water systems following installation. Pipe bungs available.
Specification
Video
Tank Volume: 12 litres
Testing Fluid: Water / oil
Outlet Connection : R 1/2" BSPT
Head: 11 metres
Maximum Pressure: 60 bar, 860 psi, 6 Mpa
Maximum Temperature: 50°C (120°F)
Dimensions: 720 x 170 x 260 mm
Weight: 8 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£18
£10
£24
£35
Manual Drain Cleaner Snake - Handheld
-
Cleans pipes up to 50 mm in diameter
-
Hexagonal drive to attach a drill for drive
Manual spiral drain cleaner for the removal of obstructions in the kitchen, baths, toilets, sinks or through drainage openings without having to disassemble the drain. Perfect for removing blockages up to 7.5 metres point of entry. There is also a hexagonal drive allowing the cleaner to be attached to a drill for even easier operation.
Specification
Spiral Diameter: 8 mm
Spiral Length: 7.5 m
Pipe Diameter Range : 20-50 mm
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£10
£7
£14
£24
Manual Drain Cleaner Snake - 15 metre
-
Cleans pipes up to 100 mm in diameter
-
Easy to operate
Large manual spiral drain cleaner for the removal of obstructions in drains with a reach of 15 metres. With a 35 mm end cutter, this ideal in clearing blockages in pipes from 40 mm to 100 mm diameter.
Specification
Spiral Diameter: 13 mm
Spiral Length: 15 m
Pipe Diameter Range : 40-100 mm
End Cutter: 35 mm
Weight: 17.5 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£20
£15
£24
£40
Handheld Pipe Bender (15-22 mm)
-
Bend pipe up to 180°
-
Easy to operate
Portable 2 handed pipe bender capable of accurately bending up to 180°. Suitable for plumbing, heating and refrigeration pipes.
Specification
Maximum Angle: 180°
Pipe Diameter: 15 and 22 mm
Weight: 4 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£10
£7
£14
£24
Portable Stand Mounted Pipe Bender (15-28 mm)
-
Bend pipe up to 180°
-
Portable and accurate
Portable stand mounted, hand operated pipe bender capable of accurately bending up to 180°. Suitable for plumbing, heating and refrigeration pipes.
Specification
Maximum Angle: 180°
Pipe Diameter: 15, 22 and 28 mm
Weight: 34 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£25
£12
£34
£45
Puddle Sucker Flood Pump
-
Electric submersible pump
-
Pumps water down to 1mm
-
No back flow
-
Dry run safe
-
110v (transformers available)
-
Supplied with lay flat hose and clip
This 1" (25mm) puddle pump is able to pump water down to 1mm making it suitable for pumping large or small areas of nuisance water found on flat surfaces. There is an internal swing check valve to prevent backflow during vertical pumping
Specification
Video
Outlet: 25mm (1")
Flow: 170 l/min
Head: 11 metres
Free passage: 6 mm
Power: 0.48 kW
Voltage: 110V
Automatic float switch: No
Body construction: Pressed steel casing
Height: 316 mm
Diameter: 196 mm
Weight: 14.3 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£18
£15
£24
£45
2" Submersible Pump - Automatic
-
General purpose electric submersible pump
-
Automatic float switch
-
Pumps water down to 1mm
-
110v (transformers available)
-
Supplied with lay flat hose and clip
This 2" (50mm) fully submersible pump is a multi purpose waste water pump and comes with an automatic on/off float They are suitable for drainage applications of clean and dirty water from drains, wells, pools and inaccessible areas.
Specification
Outlet: 50 mm (2")
Flow: 240 l/min
Head: 12 metres
Free passage: 6mm
Power: 0.4 kW
Voltage: 110V
Automatic float switch: Yes
Body construction: Stainless steel and cast iron
Dimensions: 420 x 150 x 220 mm
Weight: 15 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£18
£15
£24
£45
2" Centrifugal Petrol Water Pump
-
Market leading Honda pump
-
8 m suction head
-
Supplied with 18' inlet and 30' outlet hose
These 2" (50 mm) versatile lightweight portable Honda pumps offer an uncompromised level of performance to a wide variety of water transfer applications such as flooded areas, tanks and swimming pools.
Specification
Engine: Honda GX120 OHV - 4 Stroke
Inlet: 50 mm (2")
Outlet: 50 mm (2")
Total Head: 32 metres (105 ft)
Suction Head: 8 metres (26.3 ft)
Flow: 600 l/min
Continuous Running Time: 1 hr 54 mins
Noise Level: 101 dB (A)
Dimensions: 455 x 365 x 420 mm
Weight: 21 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£28
£18
£40
£60
2" Trash Pump
-
Honda engine
-
Heavy Duty
-
Supplied with inlet and outlet hoses
This powerful self priming pump is lightweight in construction for a heavy duty trash / slurry pump and is designed for solids handling up to 25 mm. Ideal for de-watering of trenches and excavations, washdown, irrigation, emergencies and filling & emptying etc.
Specification
Engine: Honda GX120 OHV - 4 Stroke
HorsePower: 5.5 hp
Inlet: 50 mm (2")
Outlet: 50 mm (2")
Total Head: 30 metres
Flow: 1300 l/min max
Solids Handling: 25 mm
Weight: 34 kg
Rates
1ST DAY
EXTRA DAY
WEEKEND
WEEK
£35
£20
£50
£80