top of page

SITE / EXCAVATION

Vacuum Slab Lifter (battery operated)
Slab Lifter.heic
  • Battery operated

  • 2 person handle

  • Ergonomic foot release

No more sore backs or nipped fingers.  This lightweight, battery operated vacuum slab lifter is capable of lifting slabs up to 120 kg in weight.  Supplied with 2 x fully charged batteries, charger and a height & length adjustable 2 person handle.

As well as slabs and larger tiles, the 2 person handle can be removed and the vacuum 'Grabo' device used to lift and place smaller tiles, sheets of wood, plasterboard and glass.

Specification
Video

Battery Voltage:  14.8 V Li-ion

Battery Cell Specification:  2.6 Ah

Rated Power: 16 W 

Working Time (constant):  1.5 hours

Working Load:  120 kg

Weight (Vacuum) :  1.5 kg

Weight (2 Person Handle) :  10.1 kg

Rates

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£25

£10

£33

£75

SafetyHelmet.png
HighVis.png
Car.png
Cable and Pipe Detector
CAT and SG.jpg
  • Dual Signal

  • 3 modes (Power, radio & Generator)

  • Daily Automatic Calibration

  • Accurate Depth Indication

  • Data Logging

  • Backlit Screen

An absolute must before any excavation works are undertaken. Remain safe and avoid any unnecessary additional work and costs from fixing utilities.

The Cable Avoidance Tool (CAT) will successfully detect the hardest to find pipes and cables with pinpoint precision of buried services.

The simultaneous dual-frequency Signal Generator (SG) is ideal for maximising the number of buried services that can be energised and detected. The SG can apply the dual frequency signal without direct connection to buried services, using either a signal clamp or the simple induction method from ground level, providing a significant improvement in detection of the smaller diameter or poorly earthed cables.  The fully adjustable 1 watt SG power output means that deeper pipes and cables can be effectively energised and then traced over longer distances.

C.A.T Features
  • Power Mode

  • Radio Mode

  • Generator/Transmitter Mode

  • Simultaneous 33 +131 kHz ​​

    • 33 kHz​ signal detection for all purpose tracing and utility avoidance

    • 131 kHz for optimum detection of short length, small diameter or unearthed cables

  • All Scan Mode

  • Accurate depth Indication

  • Overload Protection

  • AlarmZone

  • Peak Hold

  • Dynamic Swing Sensor

  • Automatic Daily Self Test

  • Data Logging rate of once per second

  • 2GB memory

  • Data Transfer via USB

  • IP65

SG Features
  • One Watt Power

  • 4 x Power Levels

  • 33 + 131 kHz Connected and Induced Generator / Transmitter Frequencies

  • Pulsed Continuous Output Signal

  • Signal Connection Modes

    • Direct Connection​

    • Wraparound

    • Induction

  • Automatic Daily Self Test

  • Data Logging 

  • Data Transfer via USB

  • IP65

Rates

C.A.T Scanner

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£30

£15

£40

£55

C.A.T Scanner and Signal Generator

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£55

£25

£70

£95

Car.png
Hydraulic Post Hole Borer 
Auger.jpg
6%20inch%20auger%20bit_edited.png
Auger digging matrix 1.jpg
  • Fits 750 to 2000 kg excavators

  • High torque gearbox

  • 6", 9" or 12" Auger bits available

Bore holes with ease, the hydraulic auger is designed for micro and mini excavators from 750 kg to 2,000 kg with a flow between 15 to 55 lpm. Ideally used for drilling holes for fencing, tree planting, house foundations, and more. Innovative design allows the gearbox to go down the hole to maximise drilling depth without extensions,

Specification
Video

Recommended Flow:  15-45 lpm

Max Torque: 1166 Nm 

Max Pressure (Do not exceed):  240 bar @ 60 lpm 

Max Flow (Do not exceed):  115 lpm @ 130 bar

Max Power (Do not exceed): 25 Kw (34 hp)

Overall Drive Unit Length: 500 mm

Drive Unit Diameter:  187 mm

Drive Unit Weight: 41 kg

Auger Bit Length: 1270 mm

Diameter Auger Bits Available: 6", 9" & 12"

Hydraulic Quick Connect Socket: 1/2-14 BSPP

Rates

Auger Drive Unit (includes 1 x auger bit)*

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£60

£30

£80

£150

Additional Auger Bits*

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£10

£5

£12

£25

*Excessive wear or damage to auger bit is chargeable

SafetyHelmet.png
HighVis.png
Glasses.png
Van.png
1.2 Tonne Mini Excavator E10z
Bobcat-E10-2018-1.jpg
  • Foldable Roll Over Protection

  • Zero Tail Swing

  • 710mm Narrow (Extendable tracks)

  • Refined Servo Controls

With a retracted track width of only 710 mm, the Bobcat® E10z compact excavator (mini excavator) can access difficult and cramped jobsites where exhausting manual labour is your only other option. This model navigates through narrower openings and can operate in more confined areas than other excavators. The zero tail swing gives you the greatest flexibility to pivot and deposit soil while offering the most protection against accidental contact with surrounding property.

Specification
Video

Fuel:  Diesel

Fuel Capacity: 16 litres 

Max Outreach:  3093 mm 

Max Digging Depth:  1820 mm

Max Digging Force: 8294 N

Noise Level: 80 dB (A)

Speed:  2.1 km/h (low) 3.1 km/h (high)

Dimensions (L x W x H): 2793 x 710 x 2209 mm

Weight: 1176 kg

Rates

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£95

£70

£150

£350

SafetyHelmet.png
HighVis.png
Truck.png
Trailer.png
4x4 Petrol Mini Dumper 300 kg
Minidumper.png
  • Honda Engine

  • 300 kg Load Capacity

  • 716mm Narrow

  • 4x4

The BMD motorized pedestrian 4-wheel drive Minidumper is designed for loading and transporting with speed, greater flexibility and maneuverability . It can accommodate all kind of loads, on any terrain, for various applications in construction as well as in landscaping and agricultural work.

Specification
Video

Engine: 4 Stroke Honda GXV 160

Fuel:  Unleaded

Horsepower:  5.5 HP 

Fuel Capacity: 2.5 litres 

Load Capacity: 300 kg

Skip Capacity Level Filled:  113 Ltr.

Skip Capacity Heaped Volume:  134 Ltr

Unladen Weight: 155 kg

Max. Speed Forward:  6 km/h

Max. Speed Reverse:  2.6 km/h

Maximum Uphill / Downhill Gradient: 20°

Dimensions (L x W x H): 1609 x 716 x 934 mm

Noise Level: 101 dB(A)

Rates

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£45

£25

£60

£125

SafetyHelmet.png
HighVis.png
Van.png
Trailer.png
Hi Tip Tracked Narrow Dumper 1000 kg
Skip-Loader-Dumper-1-Tonne-Tracked-Tool-
  • Honda Engine

  • 1 ton Load Capacity

  • 750mm Narrow

  • Hi Tip for Skips

This compact Track Dumper has a maximum width of 750mm and a length of 1900mm. It can turn on its own length offering greater accessibility and manoeuvrability in urban areas or areas where larger plant can’t gain access.  High tipping height allows easy tipping into skips. With a very low ground pressure and rubber tracks the Slanetrac HT1000 offers minimum ground damage while excellent gradability and stability ensure safe operating of the dumper.

Specification
Video

Engine: 4 Stroke Honda GX 390

Fuel:  Unleaded

Horsepower:  13 HP 

Starting:  Electric 

Fuel Capacity: 5.5 litres 

Load Capacity: 1 ton

Unladen Weight: 670 kg

Contact Pressure: 0.25 kg/m2

Speed:  4.5 km/h

Gradability: 36%-50%

Dimensions (L x W x H): 1900 x 750 x 1325 mm

Rates

1ST DAY

EXTRA DAY

WEEKEND

WEEK

£85

£45

£120

£195

SafetyHelmet.png
HighVis.png
Van.png
Trailer.png
bottom of page